新建锚点2
Welcome to QOOBE Support
Download
Reminder: After clicking Download, if the browser prompts whether to keep the file, please click Save
QOOBE I N150
QOOBE SUC N150
QOOBE NAS N150
Please select and down the document or zip file you need.
Please note that the document(s) may require ample storage space.
QOOBE U155H
Please select and down the document or zip file you need.
Please note that the document(s) may require ample storage space.
QOOBE I N100
QOOBE II N100
Please select and down the document or zip file you need.
Please note that the document(s) may require ample storage space.
QOOBE I N5105
Please select and down the document or zip file you need.
Please note that the document(s) may require ample storage space.
QOOBE II
AP12450/1215U/AP13620H
Please select and down the document or zip file you need.
Please note that the document(s) may require ample storage space.
QOOBE II
Series
Please select and down the document or
zip file you need.
Please note that the document(s) may
require ample storage space.
QOOBE II TB11390
Please select and down the document or zip file you need.
Please note that the document(s) may require ample storage space.
QOOBE III CH10875
Please select and down the document or zip file you need.
Please note that the document(s) may require ample storage space.
QOOBE III TH11900
Please select and down the document or zip file you need.
Please note that the document(s) may require ample storage space.
.
新建锚点4
新建锚点3
FAQ
Hot Topics
☆Unable to boot
1. low battery (less than 1% power)
If the tablet does not respond after pressing the power button, you can plug it in for about half an hour to 1 hour. Try again to see if it can be turned on;
2. It may be the cause of an adapter or charging line failure.
Test whether it is charged normally on other devices (such as mobile phones, equivalent current and voltage plates). If it cannot be charged properly, please replace the adapter and charging cable. 3. system crash.
Plug in the charger first, charge about 1 hour, then press and hold the power button for 15 seconds to force reset, then restart after 5 to 10 seconds in the middle;
4. the boot key is not good
The power button cannot be pressed and cannot be used normally.
5. USB charging dock is damaged
Check if there is any abnormality in the USB interface. If the damage is broken, the pinhole is offset, or the USB cable is loose after plugging in the charging cable, it can be defined as a bad USB interface, causing the plugged adapter not to be charged, and the disassemble and then replace the USB interface;
6. the battery is in poor condition
If the charging indicator flashes after plugging in the adapter, the power is 100% after the power is turned on, but the adapter is turned off immediately after the adapter is unplugged. This phenomenon is caused by a bad battery and needs to be replaced.
7. the display is broken
After the boot, the screen has brightness. If you press and hold the power button for 15 seconds, the backlight can be turned off normally. This phenomenon is bad for the display and the display needs to be replaced.
8. the display FPC cable is not good
If the plate falls during use, or if the assembly fails, the display FPC cable will fall off. Finally, the machine can't be turned on, then you need to disassemble the panel battery and then re-insert the FPC cable, or replace the new cable with poor cable;
9. the BIOS file is missing
In this case, you need to use the tool to scan the BIOS on the computer after disassembling the machine. You cannot directly operate it through the USB flash drive.
10, the motherboard is bad
Note: The above 1, 2, and 3 treatment solutions can be solved by themselves; 4, 5, 6, 7, 8, 9, and 10 need to be sent back to the after-sales processing.
☆WiFi is not available
1. If the WiFi speed of the phone is 0, then please restart the router.
2. The WiFi speed of the mobile phone is not 0. It may be that the computer has been used for a long time. The computer is hot and affects the use. Please try to shut down for 15 minutes, then turn it on again.
3. If neither of the above conditions exist, then there may be a problem with the system and the system needs to be reinstalled.
☆The screen has a few pixels white point
1. First confirm whether the white point cause is the background.
2. Then look at other underlying pages to see if there are still pixel white points.
3. In addition, the display in the industry standard is allowed to have a dot or bright spot of 0.2-0.4.
☆Some keyboard keys cannot be used
1. Do the user have any other OS installed?
2. Does the keyboard have been accidentally splashed into the keyboard by water drops, causing the local buttons to have no effect;
3. Please contact aftersale@metaverpivot.com for questions about the keyboard itself.
☆Keyboard cannot be used
1. It may be that after the user lock the touchpad, there is no way to control the touchpad, it is considered that the keyboard is useless. Solution: (Directly press and hold the FN+ESC button to unlock.
2. If it is a problem with the keyboard itself, this needs to see the keyboard to detect the analysis.
☆After powering on for a period of time, it will automatically shut down. Even if it is charged
After powering on for a period of time, it will automatically shut down. Even if it is charged. It just shows that it is charging, but it still can't boot.
It is recommended to charge longer (more than 1 hour) and then unplug the charger, and then confirm whether the power-on indicator will light when the notebook is restarted.
Support
About us
Copyright © 2024 Metaverpivot Co., Ltd
